 |
DL5000-MB+
Modbus/ASCII Interface to Modbus Plus
The DL5000-MB+ Communicator enables Modbus and Generic Data (ASCII) serial application protocols to exchange data with Modbus Plus devices and networks. The DL5000 Communicator is an external DIN rail device that connects Modbus Plus networks to serial interface devices and networks using standard connectors.
The DL5000-MB+ enables PCs, PLCs and MMIs as well as OEM equipment such as bar-code readers, printers, scales, process control devices etc., to connect to Modbus Plus devices and networks.
The Communicator is fully configurable through a user-friendly Windows configuration program that enables a PC to configure certain fieldbus parameters as well as all serial sub-network properties.
Features:
- Din rail mountable (or free-standing) in small footprint
-
Up to 1024 bytes of I/O data storage (512 Input and 512 Output)
-
Serial interface selections RS232, RS422 and RS485
- Modbus RTU Master and Generic Data (ASCII) modes
- Multi-drop up to 31 serial devices
- Generic Data mode for both solicited or unsolicited messaging
- PC-software for easy configuration
- Switches for setting fieldbus node address (where applicable)
- UL, cUL and CE approved
Specifications:
Mechanical Dimensions: 4.75" x 3" x 1.1"
ooooooooo (120mm x 75mm x 27mm)
Power Supply: 24 V DC (300mA max)
Operating Temperature: 0-70 deg C
Mechanical rating: IP20
Modbus Plus baud rate: 1 Mbaud
Serial Network Baud rate: Up to 57.6 Kbaud |
Serial interface: RS232, RS422 and RS485 (software selectable)
Supported Modbus Plus features: Global Data Base Transaction: Global Data Base Transaction, Routing to up to 6 networks, Point-to-Point commands: Read Holding Register, Preset Single Register and Preset Multiple Registers
Order Code: DL5000-MB+ |
|
|
