 |
DL4000-DMX
DF1 to Modbus MASTER/SLAVE Interface
The DataLink DL4000-DMX has two configuration modes that allow Modbus devices to communicate with AB's DF1 protocol (CH0's of PLC's, SLC's, etc). Modbus Master Mode configures the DL4000-DMX to act as a Master on the Modbus Network. Commands can be generated inside the SLC (DF1 Device) to access/change data inside Modbus Slave devices. Modbus Slave Mode configures the DL4000-DMX to act as a Slave on the Modbus Network. Commands can be generated inside a Modbus
Master Device to access/change data inside the SLC (DF1 device).
Compact and Lightweight
The smallest and lightest freestanding/din rail mounted serial interface for custom networks available.
Serial Interfacing
CHA - RS232, RS422 and RS485 Interface to DF1 (Full Duplex) device (SLC CH0)
CHB - RS232, RS422 and RS485 Interface to Modbus Device (RTU or ASCII)
Physical Dimensions
Size: 1.2"H x 4.75"D x 3.2"W
 (30.4 mm x 120.7 mm x 81.3 mm)
Weight: 0.56lbs (0.194 kg)
Power: DC: 9-27 VDC; Less than 2 Watts
Installation
Metal enclosure; Freestanding, DIN rail
mounting clips, or #8 bolts
Environment
Operating: +32 F to 122 F (0 C to +50 C)
Storage: -40 F to +185 F (-40 C to +85 C)
Humidity: 5% to 95% non-condensing |
Indicators
Green LED for power-onRed/Green BI-Color LED's for communications
Pushbuttons
Reset and Configure/Diagnostics mode pushbuttons
Communications
Channel A: Full Duplex DF1, 300 b to 230.4 Kb
Channel B: Modbus ASCII/RTU, 300 b to 230.4 Kb
Connectors
CHA: 9-pin RS232, 4-pin RS422/RS485
CHB: 9-pin RS232, 4-pin RS422/RS485
Power: 2-pin Phoenix Euro |
|
|
