 |
| |
 |
 |
 |
 |
 |
 |
 |
 |
|
| |
 |
Freestanding Controllers
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
DF1
to DH+ or DF1 to DH+ bridge
The DataLink DL2000-KFX used in Standard
(A-B DF1 to DH+) mode as an alternative
to A-B's 1770-KF2, or configure a pair of DataLink's DL2000-KFX units
in Bridging mode to enable
DH+ to DH+ network bridging and DH+ network bandwidth expansion. |
|
|
|
|
|
|
| |
Modbus
to DH+
The DataLink DL2000-CMX interfaces serial devices and networks using Modbus
protocol to DH+. Configurable for Modbus Master or Modbus Slave
in RTU or ASCII modes. Enables communications between DH+ and Modbus Plus
when combined with a Modicon BM85 Bridge Multiplexer. |
|
|
|
|
|
|
| |
Bi-directional
ASCII to DH+
The
DataLink DL2000-ASM facilitates
data transfer from ASCII devices to all
Allen-Bradley PLCs, including those with no ASCII port, such as A-B’s
ControlLogix. Or interface serial printers
and message displays to PLC5s over DH+. |
|
|
|
|
|
|
| |
DF1
to A-B Remote I/O Link or DH+
When configured in Adapter
mode the DataLink DL2000-KFR unit provides a serial interface to Remote
I/O for MMIs and other devices. Can also be configured in Standard (A-B
DF1 to DH+)
mode to provide a serial interface to DH+. |
|
|
|
|
|
|
| |
2
serial DF1 ports to DH+
The DataLink DL2000-K2F provides two serial interfaces to a single DH+
for devices such as PCs, OEM equipment, Modems and HMIs. Uses Standard
(A-B DF1 to DH+)
protocol and is comparable to two DataLink DL2000-KFXs or two A-B 1770-KF2s
in one enclosure. |
|
|
|
|
|
| |
Half-duplex
master to DH+
The
DataLink DL2000-KXM is a half-duplex
serial master that interfaces slave serial devices using A-B DF1 half-duplex
slave (multi-drop) protocol to A-B DH+ networks. |
|
|
|
|
|
| |
DL2000
Units
DataLink DL2000
controllers are AC-powered products that provide freestanding interfaces
to DH+, RIO and Modbus industrial networks for Computers, Modems, MMIs,
OEM equipment and variable speed drives. Typical applications include
Operator Interfaces, PLC programming, remote communications via modems,
and SCADA (Supervisory Control And Data Acquisition).
Device
Compatibility
All DataLink
DL2000 products use an industry standard Allen-Bradley DF1 (A-B DF1)
protocol driver and will work with most products (software and hardware)
which use this
protocol. Please contact
us
to find out if the DL2000 is suitable for your application. |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
